GUTOR 0P2405A Industrial-Grade Power Component
1. Product Description
GUTOR 0P2405A is a compact industrial power regulation component under Schneider Electric, designed for low-current, small-scale industrial devices. It’s ideal for scenarios like small sensor networks, portable automation tools, low-power PLC modules, and mini HVAC control units—where stable, low-capacity power and space-saving design are top needs.
What makes it practical:
- Stable Low-Current Output: Converts DC input to steady low-voltage DC power (e.g., 12Vdc/24Vdc) with minimal ripple, so tiny devices (like micro-sensors or small displays) won’t be disrupted by voltage changes.
- Ultra-Compact Size: Small and lightweight, fitting into tight spaces like portable test kits, mini control boxes, or crowded equipment enclosures—no wasted room.
- Durable for Daily Use: Uses dust-resistant components and a tough plastic housing, working reliably on factory floors or in semi-outdoor setups (e.g., outdoor sensor cabinets) without frequent checks.
It’s perfect for powering small devices like temperature sensors, mini PLCs, or portable industrial readers—all needing consistent low-current power without taking up much space.
2. Key Technical Specifications
|
Parameter Category
|
Specific Details
|
|
Input Voltage
|
15Vdc-48Vdc (regular use); 12Vdc-50Vdc (short 5-second bursts)
|
|
Output Voltage
|
Standard: 12Vdc/24Vdc (±1% accuracy); custom 5Vdc-30Vdc available on request
|
|
Output Current
|
3A (regular use); 4.5A (short 3-second peaks)
|
|
Ripple & Noise
|
Less than 25mVpp (20Hz-20MHz)
|
|
Operating Temperature
|
-20°C to +100°C
|
|
Mounting
|
Panel mount / optional 35mm DIN rail adapter (small size)
|
|
Size (W×H×D)
|
60mm×90mm×40mm
|
|
Certifications
|
UL 61010-1, IEC 61010-1, RoHS 3.0
|
3. System Integration
The 0P2405A acts as a reliable “mini power supplier” in small-scale industrial systems:
- Power Conversion: Takes variable low-voltage DC input (e.g., from small batteries or portable power banks) and turns it into steady power for tiny devices like micro-sensors or mini displays.
- Basic Protection: Shuts off temporarily if there’s over-current (too much current) or over-temperature (too hot), protecting both the component and connected small devices from damage.
- Easy Monitoring: Front-panel LEDs show status (green = normal, red = fault) for quick checks—no extra tools needed to verify operation.
- Simple Setup: Works with standard small-gauge industrial wiring, so it can be added to existing small systems or portable tools without major rewiring.
4. Related Models in the Same Series
|
Model
|
Key Differences & Uses
|
|
GUTOR 0P2406A
|
Higher output current (6A regular use) – good for small power-hungry devices like mini motor controllers or small PLC racks.
|
|
GUTOR 0P2404A
|
Lower output current (1.5A regular use) – ideal for ultra-small devices like micro-sensors or low-power portable test tools.
|
|
GUTOR 0P2407A
|
AC input (85V-264Vac) + DC output – fits grid-powered small systems like mini HVAC control panels or office automation tools.
|
|
GUTOR 0P2408A
|
Marine-grade (salt spray resistant) – works for shipboard small devices like navigation micro-sensors or cargo tracking modules.
|
|
GUTOR 0P2409A
|
Extended temperature range (-40°C to +115°C) – fits cold-storage sensors or mild high-heat areas (e.g., near small factory ovens).
|
|
GUTOR 0P2410A
|
Dual-output (12Vdc + 24Vdc) – useful for powering two small device types at once, like a sensor (12Vdc) and a mini display (24Vdc).
|
|
GUTOR 0P2411A
|
Built-in surge protection – great for areas with frequent small power spikes (e.g., near small machinery) to safeguard tiny devices.
|
There are no reviews yet.