Gutor Electronic 0P1417 Industrial-Grade Power Component
1. Product Description
Gutor Electronic 0P1417 is a compact, low-to-medium current industrial power regulation component under Schneider Electric. It’s designed for small industrial devices that need steady, reliable power—ideal for scenarios like single-sensor setups, portable test tools, mini PLC modules, and small HVAC control units. These are use cases where space is limited and power demands are moderate, but stability can’t be compromised.
What makes it practical:
- Stable Low-Current Output: Converts DC input to steady low-voltage DC power (12Vdc/24Vdc as standard) with very little ripple. This means tiny devices like temperature sensors or mini displays won’t glitch from voltage changes.
- Ultra-Compact Design: Small and lightweight, fitting into tight spaces like portable tool cases, mini control boxes, or crowded equipment enclosures—no wasted room.
- Durable for Daily Use: Has a dust-resistant plastic housing and components that tolerate mild vibration. It works reliably on factory floors or in semi-outdoor setups (like outdoor sensor cabinets) without frequent checks.
It’s perfect for powering single sensors, portable industrial readers, or ultra-small PLCs—all needing consistent low-current power without bulky equipment.
2. Key Technical Specifications
|
Parameter Category
|
Specific Details
|
|
Input Voltage
|
12Vdc-48Vdc (regular use); 10Vdc-50Vdc (short 5-second bursts)
|
|
Output Voltage
|
Standard: 12Vdc/24Vdc (±1% accuracy); custom 5Vdc-30Vdc available on request
|
|
Output Current
|
2A (regular use); 3A (short 3-second peaks)
|
|
Ripple & Noise
|
Less than 20mVpp (20Hz-20MHz)
|
|
Operating Temperature
|
-20°C to +100°C
|
|
Mounting
|
Panel mount / optional 35mm DIN rail adapter (small size)
|
|
Size (W×H×D)
|
55mm×85mm×38mm
|
|
Certifications
|
UL 61010-1, IEC 61010-1, RoHS 3.0
|
3. System Integration
The 0P1417 acts as a reliable “mini power supplier” in small-scale industrial systems:
- Power Conversion: Takes variable low-voltage DC input (from small batteries or portable power banks) and turns it into steady power for tiny devices like single sensors or mini displays.
- Basic Protection: Shuts off temporarily if there’s over-current (too much load) or over-temperature (too hot), protecting both the component and connected devices from damage.
- Easy Monitoring: Front-panel LEDs show status at a glance—green for normal, red for fault—so you don’t need extra tools to check if it’s working.
- Simple Setup: Works with standard small-gauge industrial wiring, so it can be added to existing small systems or portable tools without major rewiring.
4. Related Models in the Same Series
|
Model
|
Key Differences & Uses
|
|
Gutor 0P1418
|
Higher output current (4A regular use) – good for small power-hungry devices like 2-3 sensor groups or mini motor controllers.
|
|
Gutor 0P1416
|
Lower output current (1A regular use) – ideal for ultra-tiny devices like micro-sensors or low-power portable test tools.
|
|
Gutor 0P1419
|
AC input (85V-264Vac) + DC output – fits grid-powered small systems like indoor sensor setups or office automation tools.
|
|
Gutor 0P1420
|
Marine-grade (salt spray resistant) – works for shipboard small devices like navigation micro-sensors or cargo tracking modules.
|
|
Gutor 0P1421
|
Extended temperature range (-40°C to +115°C) – fits cold-storage sensors or mild high-heat areas (e.g., near small factory ovens).
|
|
Gutor 0P1422
|
Dual-output (12Vdc + 24Vdc) – useful for powering mixed small devices, like a 12Vdc sensor and a 24Vdc mini display.
|
|
Gutor 0P1423
|
Built-in surge protection – great for areas with frequent small power spikes (e.g., near small machinery) to safeguard tiny devices.
|
There are no reviews yet.