Gutor Electronic 0P2439 Industrial-Grade Power Component
1. Product Description
Gutor Electronic 0P2439 is a versatile industrial power regulation component under Schneider Electric, made for small-to-mid-sized industrial devices that need stable, medium-current power. It’s ideal for scenarios like small conveyor systems, industrial sensor clusters, mid-power PLC modules, and mini robotic arms—where reliable power and easy integration are key, without requiring too much space.
What makes it practical:
- Stable Medium-Current Output: Converts DC input to steady low-voltage DC power (12Vdc/24Vdc as standard) with low ripple, so devices like small motors or multi-sensor setups won’t glitch from voltage changes.
- Balanced Size & Capacity: Not too big (fits most control boxes) and not too small (handles medium loads), making it a “middle-ground” solution for devices that need more power than tiny sensors but less than heavy machinery.
- Durable for Industrial Use: Has a dust-resistant plastic housing and vibration-tolerant components, working reliably on factory floors or in semi-outdoor enclosures (like outdoor sensor cabinets) with minimal checks.
It’s perfect for powering small conveyor motors, 4-6 sensor groups, or mid-size PLCs—all needing consistent medium-current power without bulky equipment.
2. Key Technical Specifications
|
Parameter Category
|
Specific Details
|
|
Input Voltage
|
18Vdc-60Vdc (regular use); 15Vdc-65Vdc (short 5-second bursts)
|
|
Output Voltage
|
Standard: 12Vdc/24Vdc (±1% accuracy); custom 5Vdc-30Vdc available on request
|
|
Output Current
|
5A (regular use); 7.5A (short 3-second peaks)
|
|
Ripple & Noise
|
Less than 30mVpp (20Hz-20MHz)
|
|
Operating Temperature
|
-25°C to +105°C
|
|
Mounting
|
35mm DIN rail (standard adapter included) / panel mount
|
|
Size (W×H×D)
|
68mm×105mm×42mm
|
|
Certifications
|
UL 61010-1, IEC 61010-1, RoHS 3.0
|
3. System Integration
The 0P2439 acts as a reliable “medium-power link” in small-to-mid industrial systems:
- Power Conversion: Takes variable DC input (from factory batteries or portable power banks) and turns it into steady power for devices like small conveyor motors or 4-6 connected sensors.
- Basic Protection: Shuts off temporarily if there’s over-current (too much load) or over-temperature (too hot), protecting both the component and connected devices from damage.
- Easy Monitoring: Front-panel LEDs show status at a glance—green for normal, red for fault—so you don’t need extra tools to check if it’s working.
- Simple Setup: Works with standard industrial wiring (small-to-medium gauge), so it can be added to existing systems (like upgrading an old sensor power module) without major rewiring.
4. Related Models in the Same Series
|
Model
|
Key Differences & Uses
|
|
Gutor 0P2440
|
Higher output current (8A regular use) – good for power-hungry mid-size devices like mini robotic arms or 8-10 sensor clusters.
|
|
Gutor 0P2438
|
Lower output current (3A regular use) – ideal for smaller setups like 2-4 sensor groups or ultra-small PLC modules.
|
|
Gutor 0P2441
|
AC input (85V-264Vac) + DC output – fits grid-powered systems like office automation tools or indoor conveyor setups.
|
|
Gutor 0P2442
|
Marine-grade (salt spray resistant) – works for shipboard small devices like navigation sensor clusters or cargo tracking modules.
|
|
Gutor 0P2443
|
Extended temperature range (-40°C to +120°C) – fits cold-storage conveyors or mild high-heat areas (e.g., near small factory ovens).
|
|
Gutor 0P2444
|
Dual-output (12Vdc + 24Vdc) – useful for powering mixed devices, like a 12Vdc sensor and a 24Vdc mini motor.
|
|
Gutor 0P2445
|
Built-in surge protection – great for areas with frequent small power spikes (e.g., near small machinery) to safeguard connected devices.
|
There are no reviews yet.