GUTOR 0P6257 Industrial-Grade Power Component
1. Product Description
GUTOR 0P6257 is a mid-to-high power industrial power conversion component under Schneider Electric. It’s designed to supply stable, high-current power for medium-to-large industrial equipment—ideal for heavy machinery control systems, industrial robotics (e.g., large robot arms), large-scale HVAC compressors, and renewable energy (wind/solar) main power modules. These are scenarios where reliable, high-capacity power is a must for non-stop operation.
What makes it useful:
- Stable High-Current Output: Converts DC input to consistent high-voltage DC power (like 24Vdc or 48Vdc) with low ripple. This means power-hungry devices won’t shut down or work poorly due to sudden voltage drops.
- Tough & Heat-Resistant: Has a heavy-duty aluminum housing with built-in heat sinks, so it can dissipate heat well during long hours of use. It also resists dust, moderate moisture, and vibration—perfect for busy factory floors or outdoor power cabinets.
- Easy to Integrate: Supports standard mounting ways and works with most industrial wiring. This makes it simple to add to new systems or upgrade old high-power setups.
It’s great for powering large robot joints, heavy conveyor motor controllers, and wind turbine auxiliary systems—all devices that need reliable high-current power to run smoothly.
2. Key Technical Specifications
|
Parameter Category
|
Specific Details
|
|
Input Voltage
|
48Vdc-120Vdc (regular use); 40Vdc-130Vdc (short 10-second bursts)
|
|
Output Voltage
|
Standard: 24Vdc/48Vdc (±1% accuracy); custom 12Vdc-60Vdc available on request
|
|
Output Current
|
15A (regular use); 22A (short 5-second peaks)
|
|
Ripple & Noise
|
Less than 50mVpp (20Hz-20MHz)
|
|
Operating Temperature
|
-30°C to +115°C
|
|
Mounting
|
35mm DIN rail / panel mount
|
|
Size (W×H×D)
|
110mm×160mm×75mm
|
|
Certifications
|
UL 61010-1, IEC 61010-1, RoHS 3.0
|
3. System Integration
The 0P6257 acts as a core power supplier in mid-to-large industrial systems:
- Power Conversion: Takes high-voltage DC input (from industrial battery banks or wind turbine backups, for example) and turns it into steady power for large devices like robot motors or conveyor controllers.
- Strong Protection: Shuts off temporarily if there’s over-current, over-voltage, or over-temperature. It also has short-circuit protection—keeping both the component and connected equipment safe.
- Easy Monitoring: Front-panel LEDs show status (green = normal, yellow = light load, red = fault) and a small display tracks real-time output current and voltage. No extra tools are needed for quick checks.
- Reliable Setup: Works with standard high-current industrial wiring, so it integrates smoothly into existing heavy machinery systems without major rewiring.
4. Related Models in the Same Series
|
Model
|
Key Differences & Uses
|
|
GUTOR 0P6258
|
Higher output current (20A regular use) – suitable for larger devices like industrial crane motor controllers.
|
|
GUTOR 0P6256
|
Lower output current (10A regular use) – ideal for medium-sized equipment like small robot arms or HVAC fan drives.
|
|
GUTOR 0P6259
|
AC input (110V-240Vac) + DC output – fits grid-powered large systems like factory assembly line main controllers.
|
|
GUTOR 0P6260
|
Marine-grade (resists salt spray and corrosion) – works for shipboard heavy systems like cargo winch controllers.
|
|
GUTOR 0P6261
|
Extended temperature range (-40°C to +130°C) – perfect for cold outdoor wind turbine setups or high-heat steel mill equipment.
|
|
GUTOR 0P6262
|
Dual-output (24Vdc + 48Vdc) – useful for powering two types of devices at once, such as a robot motor (48Vdc) and its sensors (24Vdc).
|
|
GUTOR 0P6263
|
Built-in battery charging function – great for renewable energy systems that need to charge backup batteries while powering loads.
|
There are no reviews yet.