GUTOR 0P9910 Industrial-Grade Power Component
1. Product Description
GUTOR 0P9910 is a high-performance industrial power regulation component under Schneider Electric, built to deliver stable, high-current power for large-scale industrial equipment. It’s ideal for industries like heavy machinery (e.g., excavator control systems), industrial robotics (large robot arms), renewable energy main systems (wind turbine power modules), and large HVAC compressors—where reliable, high-capacity power is critical for continuous operation.
What makes it practical:
- High-Current Stable Output: Converts DC input to consistent high-voltage DC power (e.g., 24Vdc/48Vdc) with low ripple, so power-hungry devices won’t shut down or malfunction due to voltage drops.
- Tough & Heat-Resistant: Features a heavy-duty aluminum housing with built-in heat sinks, which efficiently dissipates heat during long hours of operation. It also resists dust, moisture, and vibration—perfect for harsh factory floors or outdoor power cabinets.
- Flexible Integration: Supports standard mounting options and works with most industrial wiring, making it easy to add to new systems or upgrade old high-power setups.
It’s perfect for powering large robot joints, heavy conveyor motor controllers, and wind turbine auxiliary systems—all needing reliable high-current power to run smoothly.
2. Key Technical Specifications
|
Parameter Category
|
Specific Details
|
|
Input Voltage
|
48Vdc-120Vdc (regular use); 40Vdc-130Vdc (short 10-second bursts)
|
|
Output Voltage
|
Standard: 24Vdc/48Vdc (±1% accuracy); custom 12Vdc-60Vdc available on request
|
|
Output Current
|
20A (regular use); 30A (short 5-second peaks)
|
|
Ripple & Noise
|
Less than 50mVpp (20Hz-20MHz)
|
|
Operating Temperature
|
-30°C to +115°C
|
|
Mounting
|
35mm DIN rail (heavy-duty adapter) / panel mount
|
|
Size (W×H×D)
|
120mm×180mm×80mm
|
|
Certifications
|
UL 61010-1, IEC 61010-1, RoHS 3.0
|
3. System Integration
The 0P9910 acts as a core power supplier in large industrial systems:
- Power Conversion: Takes high-voltage DC input (e.g., from industrial battery banks or wind turbine backups) and turns it into steady power for large devices like robot motors or compressor drives.
- Strong Protection: Automatically shuts off temporarily if there’s over-current, over-voltage, or over-temperature. It also has short-circuit protection to keep both the component and connected equipment safe.
- Easy Monitoring: Front-panel LEDs show status (green = normal, yellow = light load, red = fault) and a small display tracks real-time output current/voltage—no extra tools needed for quick checks.
- Reliable Setup: Works with standard high-current industrial wiring, so it integrates seamlessly into existing heavy machinery systems without major rewiring.
4. Related Models in the Same Series
|
Model
|
Key Differences & Uses
|
|
GUTOR 0P9911
|
Higher output current (25A regular use) – good for larger devices like industrial crane motor controllers.
|
|
GUTOR 0P9909
|
Lower output current (15A regular use) – ideal for medium-sized equipment like small robot arms or HVAC fan drives.
|
|
GUTOR 0P9912
|
AC input (110V-240Vac) + DC output – fits grid-powered large systems like factory assembly line main controllers.
|
|
GUTOR 0P9913
|
Marine-grade (salt spray & corrosion resistant) – works for shipboard heavy systems like cargo winch controllers.
|
|
GUTOR 0P9914
|
Extended temperature range (-40°C to +130°C) – perfect for cold outdoor wind turbine setups or high-heat steel mill equipment.
|
|
GUTOR 0P9915
|
Dual-output (24Vdc + 48Vdc) – useful for powering two device types at once, like a robot motor (48Vdc) and its sensors (24Vdc).
|
|
GUTOR 0P9916
|
Built-in battery charging function – great for renewable energy systems that need to charge backup batteries while powering loads.
|
There are no reviews yet.